Delivery on this building is 10 working days to most addresses.
After you have placed your order one of our team will contact you directly to arrange a suitable delivery date.
Important - Delivery is kerb side only, though at the driver's discretion they may be able to help you lift the building to a more suitable location outside your property. If you need to transport the building through your house, then you will need to make your own arrangements prior to delivery to do this, as our drivers are not insured to enter your house.
The Customer or Friend/Neighbour will need to be present to sign for the delivery. We cannot leave the item without a signature.
We want you to enjoy the use of your new garden building for many years. To give you the best chance of doing so, your product needs protecting at the start and maintained during its life. If you're planning a DIY project, please read our Self-Installation & How to Build a Shed advice pages before you start.
All long-lasting garden buildings will have been built on a solid and level base, either concrete, slabs, a wooden frame or ground level bearers. A flat, level base is essential, for more information go to our How to Build a Shed Base guide.
If your garden building is not level and square when built, it will twist and warp with the natural movement of the wood. The first signs of this are when the doors or windows stop opening and closing properly. You may get issues with the roof and potential gaps in the panels which will allow water in, there may be flex in the floor and probably creaking. Check your base is level in both directions and adjust prior to the build. It will be really difficult to adjust afterwards.
Our styrene windows are protected using a clear film which will need to be removed after you've installed the building.
All Waltons shed windows are designed to fit well, but over time and with the movement of wood, small gaps can appear. Help to prevent this by sealing your windows with a silicone sealant. You can do this either when you build your shed, or add it to an existing one. We've created this video Protect Your Shed - Silicone Window Sealant for guidance.
We've also created these handy Maintenance Guides to help you make the most out of your building, for years to come. Should you require any further advice, you can contact our Customer Service Team on 0800 029 1000 and select Option 3.
Our dip treated buildings, once installed, will need treating as soon as possible and on an annual basis in order to receive the 10 year anti rot guarantee*. The building also includes a 1 year manufacturers guarantee* as standard.
Dip Treated Buildings
- Our buildings are supplied flat packed as DIY kits with full instructions.
- It is the customer's responsibility to follow the instructions outlined in Aftercare.
- All of our buildings are delivered unpainted. The buildings are dressed for display, we don't supply any accessories or shelves featured within the product images.
- Our factory applied Dip Treatment may differ in shade between components as it is simply a basecoat.
- Exact product dimensions are supplied on the listing as we do round off the main size of the building in order to make it easier for customers to find, so please be sure to check the item's specific measurements carefully.
- All measurements refer to the exterior of the building which includes the roof overhang unless stated otherwise.
- Our styrene windows are protected using a clear film which will need to be removed after you've installed the building.
- Delivery times highlighted with an asterisk (*) refer to working days.
10 Year Anti-Rot Guarantee
Our Dip Treated Garden Buildings come with a 10 year anti rot guarantee. Anti-rot protection guards against fungal decay. The guarantee does not cover movement, twisting, warping or splitting of timber products over time.
During manufacture we apply a water based treatment which protects against fungal and insect attack. This treatment lasts approximately 3 months and will require a preservative top coat application as soon after construction as possible.
In order to keep your building in tip top shape and maintain the 10 year anti rot guarantee, it will need re-treating at least annually. Only high quality timber preservatives should be used and applied in accordance with the manufacturer's instructions. This must be done at least annually to preserve the 10 year anti rot guarantee. For more information please refer to the Waltons T&C's.
1 Year Manufacturer's Guarantee
Subject to the conditions set out in the T&C's (Section 8) the Seller warrants that the Goods will correspond with their specification at the time of delivery and will be free from defects in material and workmanship for a period of 12 months.
This Waltons 3ft x 6ft Pressure Treated Wooden Double Log Store is great for those looking to store logs for a fire place or log burner. The log store is made from robust materials and features a rustic design that will look great in any style of garden. Featuring two units, this log store can also be used to store frequently used gardening items such as compost, spades and hose pipes, helping to keep your outside space tidy.
Waltons wooden log stores are designed to keep logs dry and feature an open design to encourage air flow, ideal for drying out fire wood. To ensure that this wooden log store lasts for many years to come, the ethically sourced timber has been pressure treated with a high quality preservative. Pressure treating the timber offers the best protection against weather damage and comes complete with a 15 year anti rot guarantee.
Slatted 16mm timber floor boards raises the logs from the ground, offering protection against damp. The 16mm overlap side and roof panels are supported by strong 2” x 1” interior framing for a robust and durable construction. The overlap design creates a weatherproof panel that provides an efficient water run-off, helping to keep logs dry.
Please Note: Sizes are approximate only. For specific details, please consult our technical department.
Choose Units: Imperial
Choose Units: Metric
|Imperial Size||3 x 6|
|Cladding Style||Overlap Cladding|
|Building Type||Storage Sheds|
|Treatment Type||Pressure Treated|
|Width|| 6' 2"|| 1.88m|
|Depth|| 3' 3"|| 0.99m|
|Eaves Height|| 4' 4"|| 1.32m|
|Ridge Height|| 5' 1"|| 1.55m|
|Internal Width|| 5' 7"|| 1.70m|
|Internal Depth|| 2' 7"|| 0.79m|